Welcome, Guest
Username: Password: Secret Key Remember me
  • Page:
  • 1
  • 2

TOPIC:

Changing bulbs for rear registration plate 5 years 8 months ago #1

  • 1898
  • 1898's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 51
  • Thank you received: 8
How is this done, where to pry and where are the sercret lock tabs?

Please Log in or Create an account to join the conversation.

Changing bulbs for rear registration plate 5 years 8 months ago #2

  • barracuda1
  • barracuda1's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 66
  • Thank you received: 17
there is a little slot on the lamp housing, use a flat screwdriver to gently prise open.

look at page 5.19 of the handbook for illustration
DynamiqueNav 1.5 Flame Red January 2017 66 Reg

Please Log in or Create an account to join the conversation.

Last edit: by barracuda1.

Changing bulbs for rear registration plate 5 years 8 months ago #3

  • 1898
  • 1898's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 51
  • Thank you received: 8
Have you tried to open it?

This is the text:
"– Unclip the light 8 (using a tool such
as a flat-blade screwdriver).
– remove the light cover to gain access
to the bulb."

The screwdriver is not mentioned for opening the light cover, only for prying loose the light housing.

Please Log in or Create an account to join the conversation.

Changing bulbs for rear registration plate 5 years 8 months ago #4

  • barracuda1
  • barracuda1's Avatar
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 66
  • Thank you received: 17
ummmmm..........................................no  !
DynamiqueNav 1.5 Flame Red January 2017 66 Reg

Please Log in or Create an account to join the conversation.

HiChanging bulbs for rear registration plate 5 years 8 months ago #5

  • Gwyn
  • Gwyn's Avatar
  • Offline
  • New Member
  • New Member
  • Posts: 11
  • Thank you received: 2
Hi thanks just replaced mine has you said just insert flat screwdriver and they just poped out very easy pulled the bulb out and pushed the new ones in 5 mins

Please Log in or Create an account to join the conversation.

HiChanging bulbs for rear registration plate 5 years 8 months ago #6

  • 1898
  • 1898's Avatar Topic Author
  • Offline
  • Senior Member
  • Senior Member
  • Posts: 51
  • Thank you received: 8
Did you use the flat scredriver to pop out the light housing as described in the manual, or did you use the flat screwdriver to somehow open the clear lens with the light housing still in place?
Did the clear lens on the light housing open as you inserted the screwdriver, or did you pry and bend the flat screwdriver directly against the clear lens, or against some lock tab inside the slot?

Please Log in or Create an account to join the conversation.

  • Page:
  • 1
  • 2
  • Not Allowed: to create new topic.
  • Not Allowed: to reply.
  • Not Allowed: to edit your message.
Time to create page: 0.129 seconds