TOPIC:

not sure if these have been mentioned but I have used a couple, they are also easy to re-pin if required.

 

Anyone can point me to which values needs to be changed and in which menu, to adjust rear view camera guiding lines? My rlink is version 3.3.
I am ok with using developer mode or ddt4all.
Lines are converging too much at the top, and I need to move red line away from bumper. Thanks.

Sent from my SM-G981B using Tapatalk

Sorry, don't really understand how the pins that go into the 24 pin socket should look like. Whatever I try to stick in there, it feels quite loose and would probably fall out from the socket after some time. Can simply pull them out. Is there perhaps any standard 4-pin connector that would fit?

Are you trying to put pins directly into the 32 pin plug for the head unit? Or 16 pin plug in the tailgate? As far as I am aware there isn’t a 24 pin plug involved fitting a reverse camera

Won’t do much… problem is in display ratio… 4:3 vs 16:9

Hi guys,
I installed the camera, everything it's ok but I can activate the guide line. I tried from developer mode and ddt4all.
In developer mode I have an option to test the guide lines , there I can see these lines but I can't save the configuration..
Do you any other tips&tricks? I have SW 7.3 version.

Kind regards.