TOPIC:

fixer wrote:

The camera will only give an image if enabled in Rlink either via developers mode or ddt4all or clip. It’s not plug and play until enabled

I did the whole USB stick, tap the screen thing to get into dev mode. And then went through the menu's to turn on the camera, and reset the R Link after. And it now shows on the R Link in the Parking Assistance or whatever it's called, next to the parking sensors options.
Or is there another part that needs activating?

fixer wrote:

Can you confirm which model yours is please? This will help me do a little more research.

And Dynamique S Nav TCE, or Nav S TCE can't remember the orientation

19 plate I think you said. If I’m right

And from what you’re saying camera should show if powered usually when just enabled.

Looking at your 32 pin plug. I’d say your loom is different to what I have seen in 2016/18 models with factory fitted parking sensors.

You need these pins wired in the 32 pin plug for the connection to the head unit this is viewed looking into the head unit socket

I have replied to your enquiry on messenger

Hello, Do you know maybe what are the colours of wires for each number? I have original Kadjar camera and my colors are: red,black, yellow and white. I want to install reversing camera but I don't have original cable. Only short cable connected to camera. Thank you a lot

I think you’ll find it somewhere in this thread. Somebody else had a similar request.